tafere.blogg.se - Tecdoc valor

#TECDOC VALOR MANUAL#

Consult owner manual or handbook if in doubt ACEA C1 Warning: these oils have the lowest SAPS limits and are unsuitable for use in some engines. Shop For ACEA A5/B5 Spec Car Engine Oil Low SAPS Diesel EnginesĪn additional category appears in these specifications in which sulphate ash, phosphorous and sulphur content (SAPS) are limited. Consult owner manual or handbook if in doubt These oils are unsuitable for use in some engines. Stable, stay-in-grade oil intended for use at extended drain intervals in high performance petrol engines and car & light van diesel engines designed to be capable of using low friction low viscosity oils with a High temperature / High shear rate (HTHS) viscosity of 2.9 to 3.5 mPa.s. In addition with lowered HTHS (2.9 to 3.5). For TDI engines with Fuel Economy Performance. Stable, stay-in-grade oil intended for use in high performance petrol and direct injection diesel engines, but also suitable for applications described under A3/B3 Shop for ACEA A3/B4 Spec Car Engine Oil ACEA A5/B5Ĭategory for high-performance engine oils. Shop for ACEA A3/B3 Spec Car Engine Oil ACEA A3/B4 Stable, stay-in-grade oil intended for use in high performance petrol engines and car & light van diesel engines and/or for extended drain intervals where specified by the engine manufacturer, and/or for year-round use of low viscosity oils, and/or for severe operating conditions as defined by the engine manufacturer Exceeds ACEA A1/B1 with regard to Noack (evaporation losses), piston cleanliness and oxidation stability. ACEA A3/B3Ĭategory for high-performance and Fuel Economy engine oils. Will be replaced by the GLOBAL DLD-1 specification. Shop for ACEA A1/B1 Spec Car Engine Oil ACEA A2/B2

Stable, stay-in-grade oil intended for use at extended drain intervals in petrol engines and car & light van diesel engines specifically designed to be capable of using low friction low viscosity oils with a high temperature / high shear rate viscosity of 2.6 mPa*s for xW/20 and 2.9 to 3.5 mPa.s for all other viscosity grades. Corresponds to the old A1 and B1 specifications with some new engine tests HTHS of 2.6 to 3.5 mPas applies to XW-20, 2.9 to 3.

Monitor activities that affect the automobile industry, cooperating with the other stakeholders involved and Undertake strategic reflection on the increasingly global challenges of mobility, sustainability and competitiveness.ĪCEA Specifications - Standard Petrol and Diesel Engines ACEA A1/B1Ĭategory for Fuel Economy engine oils with especially low High Temperature High Shear viscosity.

Communicate the role and importance of the industry, using reliable data and information.

Act as a portal for expert knowledge on vehicle-related regulation.

Engage in dialogue with the European institutions and other stakeholders in order to advance understanding of industry-related issues, and to contribute to effective policy and legislation at both European and global levels.

Define and advocate the common interests, policies and positions of the European automobile industry.

Previously oils were given separate petrol and diesel ratings, but from November 2004 onwards, those have been combined (A still refers to Petrol and B to Diesel engines). These are all the current specifications. But what does it all mean?ĪCEA (the European Automobile Manufacturers Association) have a system of rating oils, which you will find on the container of almost every oil on the market. in fact you'll find one on almost all engine oil.

ACEA Car Engine Oil Specification ExplainedĪCEA Car Engine Oil Specification Explained An ACEA Spec is a very common sight.